6161 Mt. Hope Rd., Apple Creek

feedback for shapers and sander



Return Conveyors | Feedback for Shapers & Sanders

Feedback-36 | Feedback for Shapers & Sanders

Specially design to handle the fast pace of end-to-end feeding on Shapers/Sanders and Edge Foilers, Doucet Feedback Return Conveyors will give you the leading edge in today's competitive environment.

  • Available in right or left hand return configuration
  • Feature 24 or 36 inches wide receiving modules and return conveyors
  • Standard module length is 36 or 60 inches, return length is proportionate to the length of your machine
  • Power requirement is 110 volts - single phase - 15 amps service, no compressed air is required
  • PVC Rollers are individually driven by welded urethane belts

Operating Principle:

  • Feed rollers, driven by a variable speed motor, guide the part onto the receiving module
  • A set of top rollers issues a smooth transfer on the receiving module. Pieces entering the receiving table are supported by an ajustable ledge in the continuation of the reference fence.
  • Polymer belts side shift the panels to the return rollers quickly and efficiently
  • The return rollers are individually driven by welded urethane belts. These rollers are 2 inches lower than the pass height of the shaper, so parts can travel in opposite directions without interference.
  • The transfer process occurs on a continuous basis, eliminating functional limitations typical of return devices with multiple "cycle" steps

More Photos of This Product

feedback for shapers and sander